#Leaf buddi hera user manual mod
#Leaf buddi hera user manual full
#Leaf buddi hera user manual portable
#Leaf buddi hera user manual free

Other issues may indicate you have a faulty cartridge or a faulty vaporizer battery.The TH420 from Leaf buddi has unique and special design and features adjustable working voltage: 3.4V-3.7V-4.0V.

If the problem persists it means that you are not getting a connection between vaporizer and cartridge or it could either be a faulty cartridge or there is a problem with your vaporizer battery (faulty vaporizer).

(There needs to be a solid connection between the metal part of the cartridge and metal part in the battery chamber so they can conduct an electrical charge)

#Leaf buddi hera user manual free

Make sure the connecting surfaces on both the vaporizer chamber and cartridge are clean and free from debris.

If you are trying to vape and the battery seem to be working but no vapor is coming out of the cartridge, try unscrewing the cartridge from the magnetic connector and screwing in back on again (to ensure that there is a contact between the connector and cartridge).

If the LED button starts blinking 5 or more times, when you are trying to use the device, this means that the battery is out of power and needs to be recharged.

If you are pressing the center operation button and nothing is happening, please make sure the device is turned ON by pressing the button 5 rapidly.

Always make sure your TH-420 vaporizer is charged and turned ON.

The center button will also act as a Battery Power Indicator.

Battery is now charged and you are ready to vape away

Once the LED light turns off and battery is fully charged, unplug the Micro USB cable from the vaporizer.

#Leaf buddi hera user manual mod

The LED light on the mod battery will glow RED while it is charging and turn off once the charging is complete Insert the USB cable into your computer or any USB charging device.(Please note it’s best to turn the vaporizer OFF by clicking 5 times rapidly on the operation button)

Plug the Micro USB charger cable into Vaporizer box mod, located at the bottom of the device.Hold down the operation button and inhale.(Once it finished Preheating the LED light will turn off, meaning Preheating is complete and you are ready to go) To use the Preheat function, simply hit the button 2 times rapidly, the LED button will light up and start preheating the coil for you.Variable Voltage Settings: Red (3.4V), Blue (3.7V), White (4.0V).(As you are firing, LED light will light up that particular color to let you know what power setting you’re on) You will see the LED Button change color depending on the power setting you desire. Press the center operation button rapidly 3 times to change the power (Variable Voltage) settings.To turn your battery ON / OFF, click the center operation button 5 times rapidly (you should see the LED button blink a couple of times, when it’s ON or OFF).Insert the cartridge with the attached connector into the heating chamber of the box mod.Screw the cartridge onto the magnetic connector included in the kit.Make sure your vaporizer battery is charged (see section below on charging your battery).Available Colors: Black, Gray, Red, Blue, and Gold.Battery protections indicators: Low Voltage - 5 consecutive blinks (Needs to recharge).Easy Operation: Push Button to Activate.3 Level Variable Voltages: 3.4V - 3.7V - 4.0V (3 Clicks to Change Voltage Setting).

#Leaf buddi hera user manual full

Battery Voltage: 3.2V – 4.2V (at full charge).Battery: Internal Long-lasting 650mAh Battery (built-in).

#Leaf buddi hera user manual portable

Design: Portable Mini Box Mod Style (push button to activate).

Purchase Leaf Buddi TH-420 Magnet Connector About Leaf Buddi TH-420 650mAh Mini Box Mod SPECIFICATIONS